Toshiba MJ-1104 Service Manual page 47

[G] Additional folding / exiting
The stack of paper folded by the folding roller is stopped with the exit transport sensor (S41) at the stop-
ping position. The folded paper is then folded again by moving the additional folding carrier roller for-
ward and backward.
The home position of the additional folding carrier is detected by the additional folding home position
sensor (S39).
The additional folding carrier is driven by the additional folding motor (M20). The rotation of the addi-
tional folding motor (M20) is detected by the additional folding motor encoder sensor (S42).
Additional folding carrier
Additional
folding carrier
roller
After this, the paper is exited to the saddle tray with the saddle exit roller driven by the folding motor
(M17).
The passing of the paper is detected by the exit sensor (S31).
The presence of paper on the saddle tray is detected by the stack tray paper detection sensor (S32).
Saddle tray
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
Additional folding
home position sensor
Fig. 3-23
Exit sensor
Saddle exit roller
Stack tray paper
detection sensor
Fig. 3-24
3 - 19
Exit transport sensor
Additional folding
Additional motor encoder sensor
folding motor
Folding motor
Folding roller
DESCRIPTION OF OPERATIONS
3
MJ-1103/1104