Toshiba MJ-1104 Service Manual page 176

(4) Remove 4 screws, and then take off the
upper saddle cover.
Remark:
In the case of MJ-1104, open the front upper
cover and pull out the saddle unit before
starting the operation.
(5) Remove 2 screws, and then take off the sta-
pler interference switch.
[W] Connection switch (SW4)
(1) Take off the right upper cover.
 P.4-7 "[J] Right upper cover"
(2) Take off the relay guide, feeding discharge
brush and right cover.
 P.4-7 "[K] Relay guide / Feeding dis-
charge brush / Right cover"
(3) Remove 4 screws from the FIN board
bracket
MJ-1103/1104
DISASSEMBLY AND INSTALLATION
Upper saddle cover
Stapler interference
switch
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
4 - 108
Fig. 4-305
Fig. 4-306
FIN board
Fig. 4-307