Toshiba MJ-1104 Service Manual page 191

[D] Front stationary tray discharge brush / Rear stationary tray discharge brush
(1) Take off the stationary tray.
 P.4-1 "[A] Stationary tray"
(2) Loosen 1 rear side screw. Peel off the mylar
form around the screws, remove 2 screws,
and then take off the .
Note:
When installing the brush, fix the Mylar form
securely.
(3) Loosen 1 front side screw. Peel off the mylar
form around the screws, remove 2 screws,
and then take off the rear stationary tray dis-
charge brush.
Note:
When installing the brush, fix the Mylar form
securely.
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
Front stationary tray
discharge brush
Fig. 4-347
Mylar
Fig. 4-348
4 - 123
Mylar
Rear stationary tray
discharge brush
MJ-1103/1104
DISASSEMBLY AND INSTALLATION
4