Toshiba MJ-1104 Service Manual page 71

(3) Remove 2 screws, and then take off the sad-
dle tray.
Note:
When installing, hang the 2 hooks of the sad-
dle tray on the hole of the main unit.
[D] Control panel unit
(1) Remove 1 screw on the upper side of the
front rail cover.
(2) Open the front cover (MJ-1103) or the front
upper cover (MJ-1104).
(3) Remove 2 screws, and then disconnect the
connector to take off the control panel unit.
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-6
Front rail cover
Fig. 4-7
Fig. 4-8
4 - 3
Saddle tray
Connector
Control panel unit
MJ-1103/1104
DISASSEMBLY AND INSTALLATION
4