Download Print this page

Stapling Position Adjustment - Toshiba MJ-1104 Service Manual

Hide thumbs

Advertisement

5.3.2

Stapling position adjustment

(1)
Turn OFF the power of the equipment.
(2)
Remove 2 screw and take off the board access cover.
(3)
Set the SW1 on the Finisher control board as shown in the figures below.
Turn ON pin 1 and 4.
4
3
(4)
Turn ON the power of the equipment while [0] button and [8] button are pressed simultaneously.
(5)
Press [Button 1] on the touch panel 10 times and then press [Button 2] once. Then press [Button
1] once again, and [Button 2] once again. (Adjustment of LD and A3 paper starts.)
MJ-1103/1104
ADJUSTMENTS
2
1
ON
LED3
LED2
Button1
Fig. 5-14
LED1
Button2
Fig. 5-15
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
5 - 10
Board access cover

Hide quick links:

Advertisement

loading

  Related Manuals for Toshiba MJ-1104

This manual is also suitable for:

Mj-1103