show sntp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display SNTP configuration information:
enable sntp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable the SNTP function:
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual
Used to display the SNTP information.
show sntp
This command will display SNTP settings information including the source IP address, time and poll interval.
None.
Only administrator-level users can issue this command.
AT-9724TS:4# show sntp
Command: show sntp
Current Time Source
S N T P
SNTP Primary Server
SNTP Secondary Server
SNTP Poll Interval
A T - 9 7 2 4 T S : 4 #
Enables SNTP server support.
enable sntp
This will enable SNTP support. SNTP service must be separately configured (see config sntp). Enabling and
configuring SNTP support will override any manually configured system time settings.
None.
Only administrator-level users can issue this command. SNTP settings must be configured for SNTP to function
(config sntp).
AT-9724TS:4# enable sntp
Command: enable sntp
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
: System Clock
: Disabled
: 10.1.1.1
: 10.1.1.2
: 720 sec
206