Enable Snmp Traps; Show Snmp Traps - Allied Telesis AT-9724TS Reference Manual

enable snmp traps

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable SNMP trap support on the Switch:
enable snmp authenticate_traps
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To turn on SNMP authentication trap support:

show snmp traps

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view the current SNMP trap support:
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual
Used to enable SNMP trap support.
enable snmp traps
The enable snmp traps command is used to enable SNMP trap support on the Switch.
None.
Only administrator-level users can issue this command.
AT-9724TS:4# enable snmp traps
Command: enable snmp traps
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
Used to enable SNMP authentication trap support.
enable snmp authenticate_traps
This command is used to enable SNMP authentication trap support on the Switch.
None.
Only administrator-level users can issue this command.
AT-9724TS:4# enable snmp authenticate_traps
Command: enable snmp authenticate_traps
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
Used to show SNMP trap support on the Switch.
show snmp traps
This command is used to view the SNMP trap support status currently configured on the Switch.
None.
Only administrator-level users can issue this command.
AT-9724TS:4# show snmp traps
Command: show snmp traps
S N M P T r a p s
Authenticate Traps
A T - 9 7 2 4 T S : 4 #
: Enabled
: Enabled
46