Enable Ospf - Allied Telesis AT-9724TS Reference Manual

config ospf router_id
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the OSPF router ID:

enable ospf

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable OSPF on the Switch:
disable ospf
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable OSPF on the Switch:
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual
Used to configure the OSPF router ID.
config ospf router_id <ipaddr>
This command is used to configure the OSPF router ID.
<ipaddr> – The IP address of the OSPF router.
Only administrator-level users can issue this command.
AT-9724TS:4# config ospf router_id 10.48.74.122
Command: config ospf router_id 10.48.74.122
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
Used to enable OSPF on the Switch.
enable ospf
This command, in combination with the disable ospf command below, is used to enable and disable OSPF on
the Switch.
None.
Only administrator-level users can issue this command.
AT-9724TS:4# enable ospf
Command: enable ospf
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
Used to disable OSPF on the Switch.
disable ospf
This command, in combination with the enable ospf command above, is used to enable and disable OSPF on
the Switch.
None.
Only administrator-level users can issue this command.
AT-9724TS:4# enable ospf
Command: disable ospf
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
251