Config Ssh Algorithm - Allied Telesis AT-9724TS Reference Manual

High-density layer 3 stackable gigabit ethernet switch command line interface
Hide thumbs Also See for AT-9724TS:
Table of Contents

Advertisement

config ssh algorithm

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the SSH algorithm:
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual
Used to configure the SSH algorithm.
config ssh algorithm [3DES | AES128 | AES192 | AES256 | arcfour | blowfish | cast128 |
twofish128 | twofish192 | twofish256 | MD5 | SHA1 | DSA | RSA] [enable | disable]
This command allows you to configure the desired type of SSH algorithm used for authentication encryption.
3DES – This parameter will enable or disable the Triple_Data Encryption Standard encryption algorithm.
AES128 – This parameter will enable or disable the Advanced Encryption Standard AES128 encryption
algorithm.
AES192 – This parameter will enable or disable the Advanced Encryption Standard AES192 encryption
algorithm.
AES256 – This parameter will enable or disable the Advanced Encryption Standard AES256 encryption
algorithm.
arcfour - This parameter will enable or disable the Arcfour encryption algorithm.
blowfish – This parameter will enable or disable the Blowfish encryption algorithm.
cast128 – This parameter will enable or disable the Cast128 encryption algorithm.
twofish128 – This parameter will enable or disable the twofish128 encryption algorithm.
twofish192 – This parameter will enable or disable the twofish192 encryption algorithm.
MD5 – This parameter will enable or disable the MD5 Message Digest encryption algorithm.
SHA1 – This parameter will enable or disable the Secure Hash Algorithm encryption.
DSA – This parameter will enable or disable the Digital Signature Algorithm encryption.
RSA – This parameter will enable or disable the RSA encryption algorithm.
[enable | disable] – This allows you to enable or disable algorithms entered in this command, on the Switch.
Only administrator-level users can issue this command.
AT-9724TS:4# config ssh algorithm Blowfish enable
Command: config ssh algorithm Blowfish enable
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
159

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents