Clear Counters; Clear Log - Allied Telesis AT-9724TS Reference Manual

To display the current cpu utilization:

clear counters

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To clear the counters:

clear log

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To clear the log information:
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual
AT-9724TS:4# show utilization cpu
Command: show utilization cpu
CPU utilization :
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Five seconds - 15%
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
A T - 9 7 2 4 T S : 4 #
Used to clear the Switch's statistics counters.
clear counters {ports <portlist>}
This command will clear the counters used by the Switch to compile statistics.
<portlist> – Specifies a range of ports to be configured.The port list is specified by listing the lowest switch
number and the beginning port number on that switch, separated by a colon.Then the highest switch number,
and the highest port number of the range (also separated by a colon) are specified.The beginning and end of
the port list range are separated by a dash. For example, 1:3 specifies switch number 1, port 3. 2:4 specifies
switch number 2, port 4. 1:3-2:4 specifies all of the ports between switch 1, port 3 and switch 2, port 4 – in
numerical order.
Only administrator-level users can issue this command.
AT-9724TS:4# clear counters ports 2:7-2:9
Command: clear counters ports 2:7-2:9
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
Used to clear the Switch's history log.
clear log
This command will clear the Switch's history log.
None.
Only administrator-level users can issue this command.
AT-9724TS:4# clear counters ports 2:7-2:9
Command: clear counters ports 2:7-2:9
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
One minute - 25% Five minutes - 14%
59