Config Authen Application - Allied Telesis AT-9724TS Reference Manual

Example usage:
To display all method lists for promoting user level privileges to administrator level privileges:

config authen application

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the default method list for the web interface:
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual
AT-9724TS:4# show authen_enable all
Command: show authen_enable all
Method List Name
- - - - - - - - - - - - - - - -
P e r m i t
d e f a u l t
Total Entries: 2
A T - 9 7 2 4 T S : 4 #
Used to configure various applications on the Switch for authentication using a previously configured method
list.
config authen application [console | telnet | ssh | http | all] [login|enable][default|method
list name<string15>][login | enable] [default | method_list_name <string 15>]
This command is used to configure switch configuration applications (console, telnet, ssh, web) for login at the
user level and at the administration level (authen_enable) utilizing a previously configured method list.
application – Choose the application to configure.The user may choose one of the following four applications to
configure:
console – Choose this parameter to configure the command line interface login method.
telnet – Choose this parameter to configure the telnet login method.
ssh - Choose this parameter to configure the SSH (Secure Shell) login method.
http – Choose this parameter to configure the web interface login method.
all – Choose this parameter to configure all applications (console, telnet, web, ssh) login method.
login – Use this parameter to configure an application for normal login on the user level, using a previously
configured method list.
enable – Use this parameter to configure an application for upgrading a normal user level to administrator
privileges, using a previously configured method list.
default – Use this parameter to configure an application for user authentication using the default method list.
method_list_name <string 15> -– Use this parameter to configure an application for user authentication using a
previously configured method list. Enter a alphanumeric string of up to 15 characters to define a previously
configured method list.
Only administrator-level users can issue this command.
AT-9724TS:4# config authen application http login default
Command: config authen application http login default
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
P r i o r i t y Method Name
- - - - - - - - - - - - - - - - - - -
1 t a c a c s +
2 t a c a c s
3 D a r r e n
4 l o c a l
1 t a c a c s +
2 l o c a l
C o m m e n t
- - - - - - -
Built-in Group
Built-in Group
User-defined Group
K e y w o r d
Built-in Group
K e y w o r d
145