Show Ipif - Allied Telesis AT-9724TS Reference Manual

show ipif

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the IP interface settings:
Note:
In the IP Interface Settings table shown above, the Secondary field will have two displays. FALSE denotes that the IP interface is a primary IP
interface while TRUE denotes a secondary IP interface.
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual
Used to display the configuration of an IP interface on the Switch.
show ipif <ipif_name 12>
This command will display the configuration of an IP interface on the Switch.
<ipif_name 12> – The name created for the IP interface to be viewed.
None.
AT-9724TS:4# show ipif System
Command: show ipif System
IP Interface Settings
Interface Name : System
S e c o n d a r y : FALSE
IP Address : 10.48.74.122
Subnet Mask : 255.0.0.0
VLAN Name : default
Admin. State : Disabled
Link Status : Link UP
Member Ports : 1:1-1:24
A T - 9 7 2 4 T S : 4 #
( M A N U A L )
120