Delete Snmp Group; Show Snmp Groups - Allied Telesis AT-9724TS Reference Manual

Example usage:
To create an SNMP group named "sg1":

delete snmp group

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the SNMP group named "sg1":

show snmp groups

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the currently configured SNMP groups on the Switch:
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual
AT-9724TS:4# create snmp group sg1 v3 noauth_nopriv
read_view v1 write_view v1 notify_view v1
Command: create snmp group sg1 v3 noauth_nopriv
read_view v1 write_view v1 notify_view v1
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
Used to remove an SNMP group from the Switch.
delete snmp group <groupname 32>
The delete snmp group command is used to remove an SNMP group from the Switch.
<groupname 32> – An alphanumeric name of up to 32 characters that will identify the SNMP group to be
deleted.
Only administrator-level users can issue this command.
AT-9724TS:4# delete snmp group sg1
Command: delete snmp group
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
Used to display the group-names of SNMP groups currently configured on the Switch.The security model, level,
and status of each group are also displayed.
show snmp groups
The show snmp groups command displays the group-names of SNMP groups currently configured on the
Switch.The security model, level, and status of each group are also displayed.
None.
None.
AT-9724TS:4# show snmp groups
Command: show snmp groups
V A C M Access Table Settings
Group Name
ReadView Name
WriteView Name
Notify View Name
Security Model
Security Level
Group Name
ReadView Name
WriteView Name
: Group3
: ReadView
: WriteView
: NotifyView
: SNMPv3
: NoAuthNoPriv
: Group4
: ReadView
: WriteView
41