Disable Ipif; Delete Ipif - Allied Telesis AT-9724TS Reference Manual

disable ipif

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable the IP interface named "s2":

delete ipif

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the IP interface named "s2":
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual
Used to disable the configuration of an IP interface on the Switch.
disable ipif <ipif_name 12> | all
This command will disable an IP interface on the Switch, without altering its configuration values.
<ipif_name 12> – The name previously created to define the IP interface.
all – Entering this parameter will enable all the IP interfaces currently configured on the Switch.
None.
AT-9724TS:4# disable ipif s2
Command: disable ipif s2
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
Used to delete the configuration of an IP interface on the Switch.
delete ipif <ipif_name 12> | all
This command will delete the configuration of an IP interface on the Switch.
<ipif_name 12> – The name of the IP interface to delete.
all – Entering this parameter will delete all the IP interfaces currently configured on the Switch.
None.
AT-9724TS:4# delete ipif s2
Command: delete ipif s2
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
119