Show Stp Ports - Allied Telesis AT-9724TS Reference Manual

Status 3: STP enabled for MSTP:

show stp ports

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show stp ports 1 through 9 on switch one:
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual
AT-9724TS:4# show stp
Command: show stp
STP Status
STP Version
Max Age
Forward Delay
Max Age
TX Hold Count
Forwarding BPDU
A T - 9 7 2 4 T S : 4 #
Used to display the Switch's current instance_id configuration.
show stp ports <portlist>
This command displays the STP Instance Settings and STP Instance Operational Status currently implemented
on the Switch.
<portlist> – Specifies a range of ports to be viewed.The port list is specified by listing the lowest switch number
and the beginning port number on that switch, separated by a colon.Then the highest switch number, and the
highest port number of the range (also separated by a colon) are specified.The beginning and end of the port
list range are separated by a dash. For example, 1:3 specifies switch number 1, port 3. 2:4 specifies switch
number 2, port 4. 1:3-2:4 specifies all of the ports between switch 1, port 3 and switch 2, port 4 – in numerical
order.
None.
AT-9724TS:4# show stp ports 1:1-1:9
Command: show stp ports 1:1-1:9
M S T P Port Information
Port Index : 1:1, Hello Time:
External PathCost
M s t i Designated Bridge
- - - - - - - - - - - - - - - - - - - - -
0 8 0 0 0 / 0 0 5 0 B A 7 1 2 0 D 6
1 8 0 0 1 / 0 0 5 3 1 3 1 A 3 3 2 4
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
: Enabled
: MSTP
: 20
: 15
: 20
: 3
: Enabled
2 /2,
: Auto/200000, Edge Port : No /No,
Internal PathCost
- - - - - - - - - - - - - - - - -
2 0 0 0 0 0
2 0 0 0 0 0
Port STP enabled
P2P : Auto /Yes
P r i o S t a t u s
- - - - - - - - - -
1 2 8 F o r w a r d i n g
1 2 8 F o r w a r d i n g
R o l e
- - - -
R o o t
M a s t e r
76