Config Authen Parameter Attempt; Show Authen Parameter - Allied Telesis AT-9724TS Reference Manual

Example usage:
To configure the response timeout to never time out:

config authen parameter attempt

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To set the maximum number of authentication attempts at 5:

show authen parameter

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show authentication parameters:
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual
AT-9724TS:4# config authen parameter response_timeout 0
Command: config authen parameter response_timeout 0
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
Used to configure the maximum number of times the Switch will accept authentication attempts.
config authen parameter attempt <int 1-255>
This command will configure the maximum number of times the Switch will accept authentication attempts.
Users failing to be authenticated after the set amount of attempts will be denied access to the Switch and will
be locked out of further authentication attempts. Command line interface users will have to wait 60 seconds
before another authentication attempt.Telnet users will be disconnected from the Switch.
parameter attempt <int 1-255> – Set the maximum number of attempts the user may try to become
authenticated by the Switch, before being locked out.The default setting is 3 attempts.
Only administrator-level users can issue this command.
AT-9724TS:4# config authen parameter attempt 5
Command: config authen parameter attempt 5
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
Used to display the authentication parameters currently configured on the Switch.
show authen parameter
This command will display the authentication parameters currently configured on the Switch, including the
response timeout and user authentication attempts.
This command will display the following fields:
Response timeout – The configured time allotted for the Switch to wait for a response of authentication from
the user attempting to log in from the command line interface or telnet interface.
User attempts – The maximum number of attempts the user may try to become authenticated by the Switch,
before being locked out.
None.
None.
AT-9724TS:4# show authen parameter
Command: show authen parameter
Response timeout:
User attempts:
A T - 9 7 2 4 T S : 4 #
60 seconds
5
152