Enable Rip - Allied Telesis AT-9724TS Reference Manual

enable rip

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable RIP:
disable rip
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable RIP:
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual
Used to enable RIP.
enable rip
This command is used to enable RIP on the Switch.
None.
Only administrator-level users can issue this command.
AT-9724TS:4# config rip ipif System rx_mode v1_only
Command: config rip ipif System rx_mode v1_only
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
Used to disable RIP.
disable rip
This command is used to disable RIP on the Switch.
None.
Only administrator-level users can issue this command.
AT-9724TS:4# disable rip
Command: disable rip
S u c c e s s .
A T - 9 7 2 4 T S : 4 #
237