Show Scheduling - Allied Telesis AT-9724TS Reference Manual

show scheduling

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the current scheduling configuration with Class 1 as the strict priority class of a Combination Queue:
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual
Used to display the currently configured traffic scheduling on the Switch.
show scheduling
The show scheduling command displays the current configuration for the maximum number of packets
(max_packets) assigned to the seven hardware priority classes on the Switch.At this value, it will empty the
seven hardware priority classes in order, from the highest priority (queue 6) to the lowest priority (queue 0).
None.
None.
AT-9724TS:4# show scheduling
Command: show scheduling
QOS Output Scheduling
MAX. Packets
- - - - - - - - - - - -
C l a s s - 0
C l a s s - 1
C l a s s - 2
C l a s s - 3
C l a s s - 4
C l a s s - 5
C l a s s - 6
A T - 9 7 2 4 T S : 4 #
1
0
3
4
5
6
7
94