Show Syslog Host - Allied Telesis AT-9724TS Reference Manual

show syslog host

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show syslog host information:
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch • Command Line Interface Reference Manual
Used to display the syslog hosts currently configured on the Switch.
show syslog host {<index 1-4>}
The show syslog host command is used to display the syslog hosts that are currently configured on the
Switch.
<index 1-4> – Specifies that the command will be applied to an index of hosts.There are four available indexes,
numbered 1 through 4.
None.
AT-9724TS:4# show syslog host
Command: show syslog host 4
Syslog Global State: Disabled
Host Id Host IP Address
- - - - - - - - - - - - - - - - - - - - - -
1 1 0 . 1 . 1 . 2
2 1 0 . 4 0 . 2 . 3
3 1 0 . 2 1 . 1 3 . 1
Total Entries : 3
A T - 9 7 2 4 T S : 4 #
S e v e r i t y F a c i l i t y
- - - - - - - - - - - - - - - -
A l l L o c a l 0
A l l L o c a l 0
A l l L o c a l 0
UDP port S t a t u s
- - - - - - - - - - - - - -
5 1 4 D i s a b l e d
5 1 4 D i s a b l e d
5 1 4 D i s a b l e d
67