Hitachi XP P9500 User Manual page 542

Message ID
KAPL10329-E
KAPL10330-E
KAPL10331-E
8-82
Message Text
A file could not be opened. File
name = aa...aa, Errno =
bb...bb. Refer to the Messages
section of the HDLM User's
Guide for instructions to correct
this problem.
A symbolic link cannot be
created. File name = aa...aa,
Errno = bb...bb. Execute the
DLMgetras utility to collect error
information, and then contact
your vendor or maintenance
company.
The registering of the block
device driver for HDLM failed.
Errno = aa...aa. Execute the
DLMgetras utility to collect error
information, and then contact
your vendor or maintenance
company.
Messages
Hitachi Dynamic Link Manager User Guide (for Linux(R))
Explanation
Re-execute the dlmcfgmgr utility.
For details on the dlmcfgmgr
utility, see dlmcfgmgr Utility for
Managing the HDLM Configuration
on page 7-22.
Details
The file could not be opened.
aa...aa: File name
bb...bb: Error number (decimal
number)
Action
Confirm the existence of the file.
If there is no problem, and then
execute the DLMgetras utility for
collecting HDLM error information,
and then contact your HDLM
vendor or the maintenance
company if there is a maintenance
contract for HDLM.
For details on the DLMgetras
utility, see DLMgetras Utility for
Collecting HDLM Error Information
on page 7-3.
Details
An attempt to create a symbolic
link has failed.
aa...aa: File name
bb...bb: Error number (decimal
number)
Action
Execute the DLMgetras utility for
collecting HDLM error information,
and then contact your HDLM
vendor or the maintenance
company if there is a maintenance
contract for HDLM.
For details on the DLMgetras
utility, see DLMgetras Utility for
Collecting HDLM Error Information
on page 7-3.
Details
An attempt to register the block
device driver of HDLM has failed.
aa...aa: Error number (decimal
number)
Action
Execute the DLMgetras utility for
collecting HDLM error information,
and then contact your HDLM