Hitachi XP P9500 User Manual page 428

Executed command
/opt/DynamicLinkManager/
bin/dlnkmgr view -sys -
pdrv,
/opt/DynamicLinkManager/
bin/dlnkmgr view -sys -lic,
/opt/DynamicLinkManager/
bin/dlnkmgr view -sys -
audlog,
/opt/DynamicLinkManager/
bin/dlnkmgr view -sys -
lbpathusetimes
/sbin/blkid
/sbin/chkconfig --list
/sbin/cryptsetup luksDump
device-file
/sbin/cryptsetup status
device-name-used-by-the-
device-mapper
/sbin/e2label
/sbin/dlmcfgmgr -v -udev
/sbin/fdisk -l
/sbin/ifconfig -a
/sbin/iscsiadm -m session -
P 3
/sbin/iscsiadm -m fw
7-18
Utility Reference
Hitachi Dynamic Link Manager User Guide (for Linux(R))
Files
blkid.txt
chkconfig.txt
cryptsetup-
luksDump.txt
cryptsetup-
status.txt
e2label.txt
dlmcfgmgr-v.txt
fdisk-l.txt
ifconfig-a.txt
iscsi_m_session.txt Session information at iSCSI
iscsi_m_fw.txt
Explanation
Block device attribute
information (when using Red
Hat Enterprise Linux 5 or Red
Hat Enterprise Linux 6)
Service settings
LUKS header information of
SCSI or HDLM device files
(when using Red Hat
Enterprise Linux 5 or Red Hat
Enterprise Linux 6)
Device mapping information
used by the HDLM devices and
the device mapper (when
using Red Hat Enterprise Linux
5 or Red Hat Enterprise Linux
6)
Label information (all the SCSI
device names and the
corresponding label names are
displayed in each line. If there
is not a label, the hyphen (-)
is displayed instead. If a Linux
file system other than the ext
file system is used, a label
name is not recorded for label
information.)
Configuration information and
management status of HDLM
devices
Disk information (when using
IA32, EM64T, or AMD64)
Information about all NICs
(when using Red Hat
Enterprise Linux 5, Red Hat
Enterprise Linux 6, or SUSE
LINUX Enterprise Server 11)
Firmware information at iSCSI
(when using Red Hat