Hitachi XP P9500 User Manual page 552

Message ID
KAPL10362-W HDLM has detected an active
KAPL10363-W A data mismatch was found.
KAPL10364-I
8-92
Message Text
path that cannot be deleted.
HDLM device = aa...aa, Device
= bb...bb (Host: cc...cc
Channel: 0 ID: dd...dd Lun:
ee...ee). Refer to the Messages
section of the HDLM User's
Guide for instructions to correct
this problem.
HDLM device = aa...aa. Execute
the DLMgetras utility to collect
error information, and then
contact your vendor or
maintenance company.
The LDEV for an HDLM device
has changed. HDLM will now
change the configuration. HDLM
device = aa...aa
Messages
Hitachi Dynamic Link Manager User Guide (for Linux(R))
Explanation
None. For details on the
dlmcfgmgr utility, see
Utility for Managing the HDLM
Configuration on page
Details
An attempt to execute the HDLM-
configuration definition utility
(dlmcfgmgr) failed because a path
to the specified HDLM device was
being used.
aa...aa: HDLM device name
bb...bb: SCSI device name
cc...cc: Host ID (decimal number)
Channel: Channel ID (fixed value:
0) (decimal number)
dd...dd: Target ID (decimal
number)
ee...ee: LUN (decimal number)
Action
Stop the application that uses the
HDLM device, unmount the HDLM
device being mounted, and then
re-execute the dlmcfgmgr utility.
For details on the dlmcfgmgr
utility, see dlmcfgmgr Utility for
Managing the HDLM Configuration
on page 7-22.
Details
When HDLM configuration
Definition Utility (dlmcfgmgr) was
executed, a mismatch of HDLM
device configuration information
was detected.
aa...aa: Logical device file name
of HDLM device
Action
Execute the DLMgetras utility for
collecting HDLM error information,
and then contact your HDLM
vendor or the maintenance
company if there is a maintenance
contract for HDLM.
For details on the DLMgetras
utility, see DLMgetras Utility for
Collecting HDLM Error Information
on page 7-3.
Details
The configuration has been
modified because an LDEV
dlmcfgmgr
7-22.