Hitachi XP P9500 User Manual page 545

Message ID
KAPL10339-I This operation will change the
configuration of HDLM devices.
Do you want to continue? [y/n]:
KAPL10340-E Several processes failed. See
the aa...aa file. Check the
message output before this
message.
KAPL10341-I The HDLM device configurations
have been changed.
KAPL10343-I HDLM has detected and
registered a new HDLM device.
HDLM device = aa...aa
KAPL10344-I HDLM has detected and
registered a new path to an
already registered HDLM device.
Hitachi Dynamic Link Manager User Guide (for Linux(R))
Message Text
Messages
Explanation
Details
This message checks whether you
want to change the configuration
definition of an HDLM device.
Action
Enter y to continue. Enter n to
cancel.
Details
Some processes in the execution
of the HDLM-configuration
definition utility (dlmcfgmgr) have
failed. Check the file aa...aa.
aa...aa: File name
Action
See the /var/opt/
DynamicLinkManager/log/
dlmcfgmgr1.log file and check
the message output before this
message. For details on the
dlmcfgmgr utility, see
Utility for Managing the HDLM
Configuration on page
Details
The configuration of a HDLM
device was changed by execution
of the HDLM-configuration
definition utility (dlmcfgmgr).
Action
None. For details on the
dlmcfgmgr utility, see
Utility for Managing the HDLM
Configuration on page
Details
By executing the HDLM-
configuration definition utility
(dlmcfgmgr), a new HDLM device
has been detected and registered
into the HDLM device
configuration definition.
aa...aa: Logical device file name
of HDLM device
Action
None. For details on the
dlmcfgmgr utility, see
Utility for Managing the HDLM
Configuration on page
Details
dlmcfgmgr
7-22.
dlmcfgmgr
7-22.
dlmcfgmgr
7-22.
8-85