Hitachi XP P9500 User Manual page 217

Specify the position of the valid title for default.
When ELILO is the boot loader
¢
Specify label for default.
33 Shut down the host.
.
Execute the following command to shut down the host:
# shutdown -h now
34 Change the configuration from a single-path configuration to a multi-path
.
configuration.
35 Start the host.
.
36 Execute the mount command to make sure that the HDLM device is
.
mounted on /boot.
The following shows an execution example for when GRUB is used as the
boot loader:
# mount
:
:
/dev/sddlmaa1 on /boot type ext3 (rw)
:
:
Check the underlined section.
37 Update the information about the volume group.
.
Execute the following command to update the information about the
volume group.
# vgscan
Reading all physical volumes.
Found volume group "VolGroup00" using metadata type lvm2
38 Check the relationship between the volume group and HDLM devices.
.
Execute the following command to make sure that the physical volumes
that make up the volume group are HDLM devices.
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Linux(R))
This may take a while...
3-149