Hitachi XP P9500 User Manual page 457

#1
Key name
intermittent_error
_monitor_number
Legend:
Optional: If a key and its setting are not specified, the installer uses the
default.
#1
If you are upgrading or re-installing HDLM, the current configuration is
applied for any setting that is not specified.
#2
For details about the functions set by these keys, see
Operating Environment) on page
#3
You can specify this key only in the following cases:
For a new installation:
¢
When on is specified for the auto_failback key in the installation
information settings file
For an upgrade installation or re-installation:
¢
When on is specified for the auto_failback key in the installation
information settings file, or when automatic failback is enabled in the
installation pre-settings
The following shows an example of an edited installation information settings
file.
[INSTALLATION_SETTINGS]
licensekeyfile=/var/tmp/hdlm_license
licensekey=/etc/opt/DynamicLinkManager/dlm.lic_key
driver_config=y
restart=n
[ENVIRONMENT_SETTINGS]
load_balance=on
load_balance_type=exlio
load_balance_same_path_use_times=32
error_log_level=3
Hitachi Dynamic Link Manager User Guide (for Linux(R))
#2
Description
You can specify a check interval
from 1 to 1440. The default is 30.
Specify the number of times an
error occurs. You can specify a
value from 1 to 99. The default is 3.
6-14.
Utility Reference
Necessity of
definition
Maxim
Upgrad
um
e
numbe
New installa
r of
installa tion or
charac
tion re-
ters
installa
tion
Optional Optional 2
set (Sets Up the
7-47