Installux.sh Utility For Hdlm Common Installer; Format; Parameters; Log File - Hitachi XP P9500 User Manual

error_log_size=9900
error_log_number=2
trace_level=0
trace_file_size=1000
trace_file_number=4
path_health_check=on
path_health_check_interval=30
auto_failback=on
auto_failback_interval=1
# intermittent_error_monitor=off
# intermittent_error_monitor_interval=210
# intermittent_error_monitor_number=3

installux.sh Utility for HDLM Common Installer

This utility determines what OS HDLM will be installed on, and installs the
corresponding version of HDLM from the DVD-ROM. This utility can also
perform unattended installations via a parameter specification.
For details about how to use this utility to install HDLM, see
on page

Format

HDLM-installation-media-mount-point/installux.sh [-v | -h | [-f
installation-information-settings-file]

Parameters

-v
Displays the HDLM version to be installed.
-h
Displays the format of the installux.sh utility.
-f installation-information-settings-file
Specify this parameter to perform an unattended installation for HDLM.
Specify an installation-information settings file for this parameter.
For details about installation-information settings files, see
Installation-Information Settings File on page

Log file

The installux.sh utility outputs execution information to the log file /var/
tmp/hdlm_installux_sh.log. If the hdlm_installux_sh.log log file already
exists, the utility appends execution information onto the end of the log file.
If the size of the log file is equal to or greater than 1 MB when the utility is
executed, the log file is renamed to hdlm_installux_sh2.log, and a new log
file is created and named hdlm_installux_sh.log, to which the execution
information is output.
7-48
3-75.
Utility Reference
Hitachi Dynamic Link Manager User Guide (for Linux(R))
Installing HDLM
Editing an
7-42.