Kapl05001 To Kapl06000 - Hitachi XP P9500 User Manual

Message ID
KAPL04052-E
KAPL04053-W The option definition file was

KAPL05001 to KAPL06000

Message ID
KAPL05003-I
KAPL05008-E
Message Text
You do not have execute
permission for the file. File
name = aa...aa
recovered from a work file.
Message Text
The HDLM driver (filter
component) was successfully
attached to Disk (aa...aa),
Partition (bb...bb).
Could not allocate memory.
(aa...aa:bb...bb) Execute the
DLMgetras utility to collect error
information, and then contact
your vendor or maintenance
company. Refer to the HDLM
User's Guide for instructions
Messages
Hitachi Dynamic Link Manager User Guide (for Linux(R))
Explanation
aa...aa: /HDLM installation
path/bin/.dlnkmgr_exe
Action
Reinstall HDLM.
Details
aa...aa: /HDLM installation
path/bin/.dlnkmgr_exe
Action
Execute the DLMgetras utility for
collecting HDLM error information,
and then contact your HDLM
vendor or the maintenance
company if there is a maintenance
contract for HDLM. For details on
the DLMgetras utility, see
DLMgetras Utility for Collecting
HDLM Error Information on page
7-3.
Action
Execute the dlnkmgr view -sys
command to check whether the
settings are recovered. If the
settings are not recovered,
execute the dlnkmgr set
operation to recover the settings.
Explanation
Details
The path corresponding to disk
aa...aa and partition bb...bb was
successfully registered in the core
logic.
aa...aa: Disk sequence number
(decimal number)
bb...bb: Fixed at 0 (decimal
number)
Action
None.
Details
aa...aa: File ID, line number,
(hexadecimal number)
bb...bb: Memory capture size
(hexadecimal number)
Action
8-33