Hitachi XP P9500 User Manual page 487

Message ID
KAPL04010-E Could not open the error log file. Details
KAPL04011-E Could not output the error log
file.
KAPL04012-E Could not create a
communication pipe. RC =
aa...aa
Hitachi Dynamic Link Manager User Guide (for Linux(R))
Message Text
Messages
Explanation
Use the dlnkmgr set operation to
return options settings back to
where you had them.
If the KAPL04033-W message is
not output, restart HDLM
manager.
If the same error occurs, re-install
HDLM. For details on the view
operation, see view (Displays
Information) on page
details on the set operation, see
set (Sets Up the Operating
Environment) on page
HDLM manager cannot start
normally (unable to open the error
log file /var/opt/
DynamicLinkManager/log/
dlmmgr[1-16].log).
Action
Check whether another program is
using the file (for example, the file
is being opened in a text editor),
or whether the error log file has
been inadvertently deleted.
Details
The log information could not be
output to the error log file /var/
opt/DynamicLinkManager/log/
dlmmgr[1-16].log.
Action
Make sure that the disk has
enough unused capacity.
Details
HDLM manager could not start
normally because it was unable to
create a pipe file, which is used in
communication with HDLM
commands.
aa...aa: OS error code(decimal
(base-10) number)
Action
Execute the DLMgetras utility for
collecting HDLM error information,
and then contact your HDLM
vendor or the maintenance
company if there is a maintenance
contract for HDLM. For details on
the DLMgetras utility, see
DLMgetras Utility for Collecting
6-28. For
6-14.
8-27