Hitachi XP P9500 User Manual page 453

Key name
The default is /var/tmp/
hdlm_license.
If you perform an upgrade installation
or re-installation without updating the
license, delete the licensekeyfile
key and value.
Specify the absolute path name of a
#1
licensekey
license key file that was created by
using the following command:
# echo "license-key" > "license-
key-file"
The default is /etc/opt/
DynamicLinkManager/dlm.lic_key.
If you perform an upgrade installation
or re-installation without updating the
license, delete the licensekey key
and value.
driver_config Specify either of the following values
to indicate whether to load the HDLM
driver and configure the HDLM device:
y: Load the HDLM driver and configure
the HDLM device (default).
n: Do not load the HDLM driver and
configure the HDLM device.
Specify whether to restart the host
restart
after installation. Specify either of the
following values:
y: Restart.
n: Do not restart (default).
When installing HDLM in an IP-SAN
environment, specify n.
Legend:
Optional: If a key and its setting are not specified, the default value will
be used.
However, for an upgrade installation or re-installation, the previous
license information will be inherited for the licensekeyfile and
licensekey keys.
#1
If no value is specified for either of these keys, the files below are read in
the order listed:
Hitachi Dynamic Link Manager User Guide (for Linux(R))
Description
Utility Reference
Necessity of
definition
Upgrade
New installati
installati on or re-
on installati
on
# #
Optional Optional
2 2
Optional Optional
Optional Optional
Maxim
um
numbe
r of
charac
ters
1024
1
1
7-43