Hitachi XP P9500 User Manual page 397

Displayed Item
No
Summary
summary
displayed
displayed
# -
IEP
HBAPortWWN -
#
Legend:
- : Not displayed
#
The path information is displayed only when a value is specified for the -
path -item parameter.
Element
Host port number (example: 0000)
Bus number (example: 0000)
Target ID (example: 000000000000003A)
Host LU number(example: 0005)
To obtain information about each element, use the HDLM-configuration
definition utility (dlmcfgmgr). For details about this utility, see
Utility for Managing the HDLM Configuration on page
Hitachi Dynamic Link Manager User Guide (for Linux(R))
Information about the intermittent error.
This item is displayed only when you specify -iem with the
-path parameter.
One of the following values is displayed for each path:
•
-
Indicates that intermittent error monitoring is disabled
or the monitoring time for an intermittent error is out
of range.
• A value of at least 0
Indicates the number of errors that occurred during
intermittent error monitoring.
•
*
Indicates that an intermittent error occurred (automatic
failbacks do not check the path).
A 16-digit hexadecimal number indicating the WWN
information for an HBA connected to the storage system.
This item is displayed only when you specify -iem together
with the -hbaportwwn parameter.
For an iSCSI interface, a hyphen (-) is displayed.
Table 6-13 Elements of a path name
Host ID (host port number)
Channel number (bus number)
Target ID
Lun (host LU number)
Command Reference
Description
Linux representation
dlmcfgmgr
7-22.
6-45