Hitachi XP P9500 User Manual page 508

Message ID
KAPL09037-E
KAPL09038-E
KAPL09039-E
KAPL09040-E
KAPL09043-I
8-48
Message Text
The status of the HDLM
manager could not be checked.
If the HDLM manager does not
start, execute the /etc/init.d/
DLMManager command with the
start parameter to start the
HDLM manager.
The HDLM configuration could
not be deleted.
The HDLM devices could not be
configured. Execute the HDLM-
configuration definition utility
(dlmcfgmgr) with the -r
parameter specified. For details
on the dlmcfgmgr utility, refer
to the HDLM User's Guide
section "dlmcfgmgr (HDLM-
Configuration Definition Utility)".
The file could not be edited. File
name = aa...aa
The installation of aa...aa
completed successfully.
Messages
Hitachi Dynamic Link Manager User Guide (for Linux(R))
Explanation
Execute the /etc/init.d/
DLMManager command with the
start parameter to start the HDLM
manager.
Details
An attempt to acquire the status
of the HDLM manager has failed.
Action
If the HDLM manager does not
start, execute the /etc/init.d/
DLMManager command with the
start parameter to start the HDLM
manager.
Details
Deleting the HDLM configuration
failed because a managed HDLM
device was being used.
Action
Stop applications that are using
the managed HDLM device,
unmount the managed HDLM
device, and then retry
uninstallation.
Details
The HDLM devices could not be
configured.
Action
Execute the HDLM-configuration
definition utility (dlmcfgmgr) with
the -r parameter specified. For
details on the dlmcfgmgr utility,
see dlmcfgmgr Utility for
Managing the HDLM Configuration
on page 7-22.
Details
An attempt to edit a file has
failed.
aa...aa: File name
Action
Make sure you can edit the file
aa...aa.
Details
HDLM was installed.
aa...aa: Name of installed file
Action
None.