Hitachi XP P9500 User Manual page 160

The following shows an example of command execution when the mount
point is /media/cdrom:
# mount /dev/cdrom /media/cdrom
For details about the fixed mount point for each distribution, see
3-51 Mount Point for Each Distribution on page
Red Hat Enterprise Linux AS4/
ES4
Red Hat Enterprise Linux 5
Red Hat Enterprise Linux 6
SUSE LINUX Enterprise Server 9
SUSE LINUX Enterprise Server 10
SUSE LINUX Enterprise Server 11
Note 1
Note 2
#
3-92
Table 3-51 Mount Point for Each Distribution
Distribution
HDLM cannot be installed if the DVD-ROM is mounted to a mount
point other than the above.
To copy the DVD-ROM to a directory, and then install HDLM from that
directory, copy the DVD-ROM to a directory with the same name as
the mount point noted above. If the file permissions or the directory
structure differs, HDLM cannot be installed.
This refers to the volume name for the CD-ROM or other media,
formatted for ISO-9660 file systems. Use the volname command to
check media-volume-id.
The following shows an execution example for when media-volume-id
is VOL01234.
# volname /dev/cdrom
VOL01234
#
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Linux(R))
3-92.
Mount point
• For a DVD-R, or DVD-ROM
/media/cdrom
• For a DVD-RW, or DVD-RAM
/media/cdrecorder
/media/cdrom
• For a DVD-ROM
/media/dvd
• For a DVD-RW
/media/dvdrecorder
• For a DVD-RAM
/media/dvdram
/media/cdrom
If the DVD-ROM is automatically mounted:
/media/ media-volume-id
Table
#