Hitachi XP P9500 User Manual page 454

a
.
b
.
If none of these files exist when you attempt to perform a new
installation, the KAPL09011-E and KAPL09212-E message is output.
If you specify a value for either the licensekey or licensekeyfile key,
the specified file will not be deleted after the installhdlm utility is
executed. If you do not specify a value for either key, the license key file
(/var/tmp/hdlm_license) or the file in which the license key is described
(/etc/opt/DynamicLinkManager/dlm.lic_key) will be deleted after the
installhdlm utility is executed.
#2
When you perform a new installation of HDLM, or when you perform an
upgrade installation while the license is expired, prepare the license key
or the license key file.
[ENVIRONMENT_SETTINGS] section
This section defines HDLM operation information. If this section is omitted,
the installer will use the following values:
• For a new installation, the installer uses the default values of the keys
that are listed in the following
[ENVIRONMENT_SETTINGS] Section on page 7-44
• For an upgrade installation or re-installation, the installer uses the old
HDLM setting values.
Table 7-12 Keys in the [ENVIRONMENT_SETTINGS] Section on page 7-44
lists the keys defined in the [ENVIRONMENT_SETTINGS] section.
Key name
load_balance
7-44
License key file (/var/tmp/hdlm_license)
File containing the license key (/etc/opt/DynamicLinkManager/
dlm.lic_key)
Table 7-12 Keys in the [ENVIRONMENT_SETTINGS] Section
#1
Specify one of the following values
to indicate whether to enable or
disable the load balancing function:
on: Enabled (default)
off: Disabled
Utility Reference
Hitachi Dynamic Link Manager User Guide (for Linux(R))
Table 7-12 Keys in the
#2
Description
.
Necessity of
definition
Maxim
Upgrad
um
e
numbe
New installa
r of
installa tion or
charac
tion re-
ters
installa
tion
Optional Optional 3