Hitachi XP P9500 User Manual page 514

Message ID
KAPL09135-E
KAPL09142-E
KAPL09143-E
KAPL09146-E
8-54
Message Text
One of the following was
executed at the same time as
an HDLM command set -lic
operation: another set -lic
operation, or an update of the
license for an update
installation.
HDLM aa...aa cannot be
performed. Wait a while, and
then perform aa...aa again.
Error Code =bb...bb
HDLM aa...aa cannot be
performed. Error Code = bb...bb
A directory required by HDLM
not found. Directory = aa...aa.
Create the directory displayed in
this message, then re-install
HDLM.
Messages
Hitachi Dynamic Link Manager User Guide (for Linux(R))
Explanation
the DVD-ROM was copied, make
sure that all the contents of the
DVD-ROM have been copied to
that directory, and then retry the
installation.
Action
Check the license by using the
HDLM command's view -sys -
lic operation. If necessary,
update the license by using the
set -lic operation during or
after the installation. If the same
error message is output, contact
your HDLM vendor or the
maintenance company if there is a
maintenance contract for HDLM.
Do not perform the following
operation:
Execution of the HDLM command's
set -lic operation simultaneously
with an update of the license for
an upgrade installation
Details
HDLM cannot be installed or
uninstalled.
aa...aa : "installation" or
"uninstallation"
bb...bb : Internal code (decimal
(base-10) number)
Action
Wait a while, and then reperform
the installation or uninstallation.
Details
HDLM cannot be installed or
uninstalled.
aa...aa: "installation" or
"uninstallation"
bb...bb: Internal code (decimal
number)
Action
Contact your HDLM vendor or the
maintenance company if there is a
maintenance contract for HDLM.
Details
aa...aa: Referenced directory
name
Action
Check the directory displayed in
the message. Re-install HDLM