Hitachi XP P9500 User Manual page 176

defaults
/dev/disk/by-id/scsi-1HITACHI_D60H03750019-part3 /
acl,user_xattr 1 1
4 Check the definition in the boot loader configuration file.
.
Check whether LABEL is used in the definition in the boot loader
configuration file. The following shows examples for LABEL.
¢
¢
For Red Hat Enterprise Linux 6, also check whether the block device
names (udev names) starting with UUID= are specified as shown in the
following underlined part below:
title Red Hat Enterprise Linux (2.6.32-71.el6.i686)
root=UUID=55574d05-07dc-4c94-a585-5599c284d79b rd_NO_LUKS
rd_NO_LVM rd_NO_MD rd_NO_DM LANG=ja_JP.UTF-8 KEYBOARDTYPE=pc
KEYTABLE=jp106 crashkernel=auto rhgb quiet
If the OS is SUSE LINUX Enterprise Server 10 or SUSE LINUX Enterprise
Server 11, also check whether the device names (udev names) starting
with the /dev/disk directory are specified as shown in the following
underlined part below. In the following example, GRUB is used as the
boot loader with Xen kernels. For details on Xen kernels, see
3-108
0 0
:
:
When GRUB is used as the boot loader with non-Xen kernels:
For details on kernels supported by HDLM, see
Supported by HDLM on page
:
:
title Red Hat Enterprise Linux (2.6.18-194.el5)
root (hd0,0)
kernel /vmlinuz-2.6.18-194.el5 ro root=LABEL=/
initrd /initrd-2.6.18-194.el5
LABEL is set in the underlined section.
When LILO or ELILO is used as the boot loader:
:
:
image=/boot/vmlinuz-2.6.18-194.el5
label=linux
initrd=/boot/initrd-2.6.18-194.el5
read-only
append="root=LABEL=/"
LABEL is set in the underlined section.
:
:
root (hd0,0)
kernel /vmlinuz-2.6.32-71.el6.i686 ro
initrd /initramfs-2.6.32-71.el6.i686.img
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Linux(R))
Hosts and OSs
3-3.
ext3
Table 3-47