Hitachi XP P9500 User Manual page 161

4 Check the version of HDLM.
.
Execute installux.sh or the HDLM installation utility (installhdlm)
stored on the HDLM DVD-ROM to check the version of HDLM that will be
installed.
The following example shows how to execute the command when the
mount point for the DVD-ROM is /media/cdrom:
When executing installux.sh
¢
# /media/cdrom/installux.sh -v
When executing the installhdlm utility
¢
# /media/cdrom/HDLM_Linux/installhdlm -v
A command execution example is described below. x.x.x-xx is the version
of HDLM.
KAPL09177-I HDLM version: x.x.x-xx
5 Perform the installation.
.
Execute installux.sh or the installhdlm utility stored on the HDLM
DVD-ROM to start installation.
The following shows an installation execution example for when the DVD-
ROM mount point is /media/cdrom.
When executing installux.sh
¢
# /media/cdrom/installux.sh
When executing the installhdlm utility
¢
# /media/cdrom/HDLM_Linux/installhdlm
6 The KAPL09093-I message is displayed to confirm that you want to
.
perform an upgrade installation. Check the HDLM version, and if it is
correct, enter y.
7 Make sure that HDLM is installed.
.
Execute the following command to display detailed information about the
installed package.
# rpm -qi HDLM
Name : HDLM
Version : x.x.x.x.xxx
Release : xx
:
If HDLM Version is x.x.x.x.xxx, the installed version of HDLM is correct.
x.x.x.x.xxx indicates the HDLM version that was installed.
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Linux(R))
3-93