Format; Parameters - Hitachi XP P9500 User Manual

Command suite for linux(r)
Hide thumbs Also See for XP P9500:
Table of Contents

Advertisement

Format

/opt/DynamicLinkManager/bin/DLMgetras {directory-to-which-collected-
information-is-output
[-f file-that-defines-information-to-be-collected]|-h}
You can also use lower-case characters (dlmgetras instead of DLMgetras) as
follows:
/opt/DynamicLinkManager/bin/dlmgetras {directory-to-which-collected-
information-is-output
[-f file-that-defines-information-to-be-collected]|-h}

Parameters

directory-to-which-collected-information-is-output
Specify the output directory for the information that is to be collected by
the DLMgetras utility for collecting HDLM error information. The collected
information is compiled into the three files shown in Function and output
in the specified directory.
-f file-that-defines-information-to-be-collected
Use this parameter when you want to specify certain directories or files to
be collected. In this parameter, specify the file-that-defines-information-
to-be-collected, which defines the files and directories you want to collect.
Use an absolute path to specify file-that-defines-information-to-be-
collected.
Figure 7-1 Coding Example of a File that Defines the Information to Be
Collected on page 7-4
this example, the information specified to be collected is as follows: the
OS files that are not collected by the DLMgetras utility by default, and the
PostgreSQL files when PostgreSQL is an upper-level application program.
Rules for coding a file that defines the information to be collected
7-4
shows an example of the coding in this file. In
Figure 7-1 Coding Example of a File that Defines the Information to
Use an absolute path to specify a directory or file whose
information is to be collected. If you use a relative path to specify
a directory or file, that directory or file will be searched for only
within the directory in which the DLMgetras utility was executed,
and the files found will be collected.
Do not specify a directory that contains the directory to which the
collected information is output. If you specify this directory, the
DLMgetras utility will run indefinitely.
Utility Reference
Hitachi Dynamic Link Manager User Guide (for Linux(R))
Be Collected

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Dynamic link manager

Table of Contents