Set (Sets Up The Operating Environment); Format; To Set Up The Hdlm Operating Environment; To Display The Format Of The Set Operation - Hitachi XP P9500 User Manual

Example 2
The following example shows how to filter and display the information on
all paths that pass through the CHA port 0A of the Thunder 9500V series:
# /opt/DynamicLinkManager/bin/dlnkmgr view -path -stname | grep
9500V | grep 0A
The above command will display information pertaining to only those
paths that pass through the specified CHA port.

set (Sets Up the Operating Environment)

The dlnkmgr command's set operation sets the HDLM operating
environment.

Format

To Set Up the HDLM Operating Environment

/opt/DynamicLinkManager/bin/dlnkmgr set
{-lb {on [-lbtype {rr|exrr|lio|exlio|lbk|exlbk}]|off}
|-ellv error-log-collection-level
|-elfs error-log-file-size
|-elfn number-of-error-log-files
|-systflv trace-level
|-systfs trace-file-size
|-systfn number-of-trace-files
|-pchk {on [-intvl checking-interval]|off}
|-afb {on [-intvl checking-interval]|off}
|-iem { on [-intvl error-monitoring-interval] [-iemnum number-
of-times-error-is-to-occur] | off }
|-lic
|-audlog {on [-audlv audit-log-data-collection-level] [-
category [[ss] [a] [ca]|all]]|off}
|-audfac facility-value
|-lbpathusetimes number-of-path-use-times}
[-s]

To Display the Format of the Set Operation

/opt/DynamicLinkManager/bin/dlnkmgr set -help
6-14
Command Reference
Hitachi Dynamic Link Manager User Guide (for Linux(R))