Hitachi XP P9500 User Manual page 165

For an unattended installation, you can specify any directory to store the
license key file. For details, see
Settings File on page
3 Insert the DVD-ROM and mount it.
.
If the DVD-ROM was not automatically mounted, execute the mount
command to mount the DVD-ROM to the fixed mount point.
The following shows an example of command execution when the mount
point is /media/cdrom:
# mount /dev/cdrom /media/cdrom
For details about the fixed mount point for each distribution, see
3-52 Mount Point for Each Distribution on page
Table 3-52 Mount Point for Each Distribution
Distribution
Red Hat Enterprise Linux AS4/
ES4
Red Hat Enterprise Linux 5
Red Hat Enterprise Linux 6
SUSE LINUX Enterprise Server 9
SUSE LINUX Enterprise Server 10
SUSE LINUX Enterprise Server 11
Note 1
HDLM cannot be installed if the DVD-ROM is mounted to a mount
point other than the above.
Note 2
To copy the DVD-ROM to a directory, and then install HDLM from that
directory, copy the DVD-ROM to a directory with the same name as
the mount point noted above. If the file permissions or the directory
structure differs, HDLM cannot be installed.
#
This refers to the volume name for the CD-ROM or other media,
formatted for ISO-9660 file systems. Use the volname command to
check media-volume-id.
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Linux(R))
Editing an Installation-Information
7-42.
• For a DVD-R, or DVD-ROM
/media/cdrom
• For a DVD-RW, or DVD-RAM
/media/cdrecorder
/media/cdrom
• For a DVD-ROM
/media/dvd
• For a DVD-RW
/media/dvdrecorder
• For a DVD-RAM
/media/dvdram
/media/cdrom
If the DVD-ROM is automatically mounted:
/media/media-volume-id
Table
3-97.
Mount point
#
3-97