Hitachi XP P9500 User Manual page 537

Message ID
KAPL10306-W The configuration definition file
is invalid. Refer to the Messages
section of the HDLM User's
Guide for instructions to correct
this problem.
KAPL10308-W The configuration definition file
could not be created. Execute
the DLMgetras utility to collect
error information, and then
contact your vendor or
maintenance company.
KAPL10309-W The HDLM management-target
disk does not exist. Check the
system configuration.
Hitachi Dynamic Link Manager User Guide (for Linux(R))
Message Text
Messages
Explanation
Action
Execute the DLMgetras utility for
collecting HDLM error information,
and then contact your HDLM
vendor or the maintenance
company if there is a maintenance
contract for HDLM. For details on
the DLMgetras utility, see
DLMgetras Utility for Collecting
HDLM Error Information on page
7-3.
Details
The configuration definition file (/
etc/opt/
DynamicLinkManager/.dlmfdrv.c
onf) is invalid.
Action
/etc/opt/
DynamicLinkManager/.dlmfdrv.c
onf to an alias name and restart
the host. The logical device file
name of the HDLM device might
be changed, so that after the host
restarts, check the logical device
file name. If the logical device file
name was changed, modify the
path to the upper-level program.
Details
The configuration definition file (/
etc/opt/
DynamicLinkManager/.dlmfdrv.c
onf) could not be created.
Action
Execute the DLMgetras utility for
collecting HDLM error information,
and then contact your HDLM
vendor or the maintenance
company if there is a maintenance
contract for HDLM. For details on
the DLMgetras utility, see
DLMgetras Utility for Collecting
HDLM Error Information on page
7-3.
Details
The HDLM management-target
device does not exist.
Action
Check the system configuration.
8-77