Hitachi XP P9500 User Manual page 399

To display LU information
When displaying LU information, if the -item parameter, -c parameter, or
the -c -item parameter is specified at the same time as the -lu parameter,
you can add and display items and display a summary of LU information. This
section describes each parameter and the LU information and displayed
items.
To display LU information
-lu
When neither the -c nor -item parameter is specified with the -lu
parameter, the information about the LU recognized by HDLM is displayed
without selecting items to be displayed or displaying a summary. The
sorting key is iLU and its configuration information is displayed for each
LU.
By using the sub-parameter, -hdev or -pathid, you can filter the LU
information to be displayed. If you do not specify -hdev or -pathid, the
information about all LUs recognized by HDLM is displayed. For details on
the content of each displayed item, see
page
-hdev host-device-name
-pathid AutoPATH_ID
-t
Example
6-51. The sub-parameters are:
Displays information only for the paths accessing the specified host
device.
Specify the name of the logical device file (minus the partition
number), /dev/sddlm[aa-pap], for the HDLM device. For details on
logical device files for HDLM devices, see
HDLM Devices on page
The host-device-name string is case-sensitive.
Use this parameter to display only the information about the LU that
is connected to the path with that specified AutoPATH_ID.
Omits the title for each information item.
The following example shows how to display the LU information
without selecting items to be displayed:
# /opt/DynamicLinkManager/bin/dlnkmgr view -lu
Product : 9500V
SerialNumber : 0115
LUs : 5
iLU HDevName Device
0000 sddlmac /dev/sds 000002 Online
/dev/sdd 000007 Online
/dev/sdi 000012 Online
/dev/sdn 000017 Online
0001 sddlmad /dev/sdt 000003 Online
/dev/sde 000008 Online
Command Reference
Hitachi Dynamic Link Manager User Guide (for Linux(R))
Table 6-17 LU Information on
Logical Device Files for
2-11.
PathID Status
6-47