Hitachi XP P9500 User Manual page 539

Message ID
KAPL10319-W usage: /sbin/dlmcfgmgr [-s]
{-r
| -o {special-file-
name ... | all}
| -i {special-file-
name ... | all}
| -v
| -u {special-file-
name ... | all}
| -logfs log-file-size}
KAPL10320-E The file format is invalid. File
name = aa...aa. Refer to the
Messages section of the HDLM
User's Guide for instructions to
correct this problem.
KAPL10321-W The specified HDLM device is
invalid. Device = aa...aa.
Specify a valid logical device file
name of an HDLM device, and
then execute the dlmcfgmgr
utility.
Hitachi Dynamic Link Manager User Guide (for Linux(R))
Message Text
Messages
Explanation
Execute the DLMgetras utility for
collecting HDLM error information,
and then contact your HDLM
vendor or the maintenance
company if there is a maintenance
contract for HDLM. For details on
the DLMgetras utility, see
DLMgetras Utility for Collecting
HDLM Error Information on page
7-3.
Details
Since the parameter of the HDLM-
configuration definition utility
(dlmcfgmgr) was inaccurate,
execution of the dlmcfgmgr utility
failed. For details on the
dlmcfgmgr utility, see
Utility for Managing the HDLM
Configuration on page
Action
Specify the correct options, and
then re-execute the dlmcfgmgr
utility.
Details
The file format is invalid.
aa...aa: file name
Action
Re-execute the HDLM-
configuration definition utility
(dlmcfgmgr). If the same
message is output, execute the
DLMgetras utility for collecting
HDLM error information, and then
contact your HDLM vendor or
maintenance company if you have
a maintenance contract for HDLM.
For details on the DLMgetras
utility, see DLMgetras Utility for
Collecting HDLM Error Information
on page 7-3. For details on the
dlmcfgmgr utility, see
Utility for Managing the HDLM
Configuration on page
Details
Executing the HDLM-configuration
definition utility (dlmcfgmgr)
failed because the logical device
file name of the HDLM device was
incorrect.
aa...aa: Logical device file name
of HDLM device
dlmcfgmgr
7-22.
dlmcfgmgr
7-22.
8-79