Hitachi XP P9500 User Manual page 438

Table 7-7 Information for the Management Status and Configuration
Item
HDevName
Management
Device
Host
Channel
Target
Lun
Udev
Example 5:
The following shows an example of setting the size of the dlmcfgmgr
utility log file:
#dlmcfgmgr -logfs 10240
In the above example, the setting value of the size of the dlmcfgmgr
utility log file is 10240 KB.
Example 6:
The following shows an example of specifying the size of the dlmcfgmgr
utility log file:
#dlmcfgmgr -logfs
KAPL10938-I dlmcfgmgr Log File Size(KB) : 10240
7-28
Information of an HDLM Device
Indicates the logical device file name of the HDLM device, using an
absolute path. This is indicated only for the first path for the relevant
LU.
Indicates the current management status of the HDLM device.
configured: indicates that the HDLM device is to be managed.
unconfigured: indicates that the HDLM device is excluded from being
managed.
Indicates the paths associated with the HDLM device.
The logical device file of the SCSI device is indicated.
The path whose allocation to an LU is canceled or path that was
disconnected at boot time is temporarily registered into HDLM and
indicated by a hyphen (-).
This problem might also occur when the OS is SUSE LINUX Enterprise
Server 11 and one of the following problems occurs while the system
is running:
• A path gets disconnected.
• An LU is deleted.
• A fiber cable connection is changed.
• A Fibre Channel switch's zone setting is changed.
Indicates the host ID (host port number).
Indicates the channel number (bus number).
Indicates the target ID (target ID).
Indicates the Lun (host LU number).
Indicates the udev name.
The name of a device whose name has not been customized by using
the udev function is indicated by a hyphen (-).
Utility Reference
Hitachi Dynamic Link Manager User Guide (for Linux(R))
Description