Hitachi XP P9500 User Manual page 589

Message ID
KAPL13909-W Usage: /opt/
DynamicLinkManager/bin/
dlmstart
KAPL13910-W The error occurred while
processing the utility for HDLM
start.
KAPL13911-E The utility for HDLM start ended
abnormally. Error Code =
aa...aa
KAPL13912-E An invalid parameter was
specified. Parameter = aa...aa
KAPL13913-E A command has failed.
Command = aa...aa, details =
bb...bb
Hitachi Dynamic Link Manager User Guide (for Linux(R))
Message Text
Messages
Explanation
Action
Re-execute the utility for HDLM
start if necessary. Refer to
dlmstart Utility for Starting HDLM
on page 7-38.
Action
Resolve the problem according to
the message KAPL13908-W, which
was output before this message.
Details
aa...aa: Error number that
identifies the executed processing
(decimal number)
Action
When the error code is 1:
When /dev/dlm/sddlmadrv0
file or a file other than
character device file, delete it
manually and then retry the
execution.
When the error code is 2:
/sbin/dlmcfgmgr file does
not exist or does not have
executable permissions.
Reinstall an HDLM.
When the error code is 3:
/etc/init.d/DLMManager file
does not exist or does not
have executable permissions.
Reinstall an HDLM.
Details
aa...aa: Specified parameter
Action
Re-execute the utility for HDLM
start if necessary. Refer to
dlmstart Utility for Starting HDLM
on page 7-38.
Details
aa...aa: Command that failed
bb...bb: Message that the
command output
Action
When the command is /sbin/
modprobe:
Reinstall an HDLM
When the command is /bin/
mknod:
8-129