Hitachi XP P9500 User Manual page 467

Message ID
KAPL01016-W The target CHA port was not
found. Operation name =
aa...aa
KAPL01018-W The target device was not
found. Operation name =
aa...aa
KAPL01019-W The target path was not found.
Operation name = aa...aa
Hitachi Dynamic Link Manager User Guide (for Linux(R))
Message Text
Messages
Explanation
path) and check the value
displayed in PathName. Use the
two leftmost digits of PathName for
the relevant HBA port, and then
retry. For details on the view
operation, see view (Displays
Information) on page
Details
The path ID indicated by -pathid
and required by the -cha
parameter is not an object of
HDLM management.
aa...aa: offline or online
Action
Execute the view operation of the
HDLM command (dlnkmgr view -
path) and check the value
displayed in PathName. Specify
the two leftmost digits of
PathName for the relevant HBA
port, and then retry. For details
on the view operation, see
(Displays Information) on page
6-28 .
Details
The specified host device name
could not be found.
aa...aa: view
Action
Execute the view operation of the
HDLM command (dlnkmgr view -
path) and check the value
displayed in PathName. Specify
the two leftmost digits of
PathName for the relevant HBA
port, and then retry. For details
on the view operation, see
(Displays Information) on page
6-28.
Details
aa...aa: offline, online, or view
offline/online operation
¢
The specified path does not
exist.
view operation
¢
The paths have not been
configured because creation
of the HDLM environment or
configuration changes to the
6-28.
view
view
8-7