Hitachi XP P9500 User Manual page 564

Message ID
KAPL12036-E
KAPL12301-E
KAPL12302-E
KAPL12303-E
8-104
Message Text
The HDLM file is invalid. File
name = aa...aa
This script can only be
executed with the name
dlmmkinitrd.
Multiple instances of the
utility for supporting the boot
disk cannot be executed
concurrently.
A file or directory does not
exist. File name = aa...aa
Messages
Hitachi Dynamic Link Manager User Guide (for Linux(R))
Explanation
Install HDLM that adjusts to the
kernel that is running now.
Details
A file necessary for processing HDLM
cannot be found. Alternatively, the
content of a file is invalid.
aa...aa: Name of file where error was
detected.
Action
Reinstall an HDLM.
Action
Please rename the script to
dlmmkinitrd.
Action
Wait until the dlmmkinitrd utility for
supporting the boot disk ends, and
then re-execute the dlmmkinitrd
utility. For details on the
dlmmkinitrd utility, see
Utility for Supporting a Boot Disk on
page 7-31.
Details
aa...aa: The name of the non-
existent file
Action
If the file name displayed in the
message is the file name specified in
the fstab parameter of the Boot Disk
Support Utility (dlmmkinitrd)
Check the specified file name, specify
the file name of the existing fstab
file, and then re-execute the utility.
If the file name displayed in the
message is the HDLM file name
shown below, HDLM may not be
installed correctly. In this situation,
re-install HDLM.
If Red Hat Enterprise Linux 5 is being
used, replace /lib/modules/kernel-
release-number/kernel/drivers/
DynamicLinkManager/ with the
following:
/lib/modules/2.6.18-xxx/extra/
hitachi/DynamicLinkManager
In the list shown below, kernel-
version indicates the value displayed
by the uname -r command.
dlmmkinitrd