Hitachi XP P9500 User Manual page 474

Message ID
KAPL01060-I
KAPL01061-I
KAPL01063-I
8-14
Message Text
specify parameter bb...bb and
parameter value cc...cc.
Operation name = dd...dd
The user terminated the
operation. Operation name =
aa...aa
aa...aa path(s) were
successfully placed bb...bb;
cc...cc path(s) were not.
Operation name = dd...dd
The target path(s) are already
aa...aa.
Messages
Hitachi Dynamic Link Manager User Guide (for Linux(R))
Explanation
A parameter value is conflicting
with the value of another
parameter.
aa...aa: Parameter name
bb...bb: Parameter name
cc...cc: Parameter value
dd...dd: view or set
Action
Execute help operation-name of
the HDLM command (dlnkmgr) to
check the parameter and
parameter value, and then retry.
For details on the help operation,
see help (Displays the Operation
Format) on page 6-4.
Details
Command processing will be
aborted because n was entered for
a required confirmation.
aa...aa: online, offline, set, or
clear
Action
None.
Details
This message indicates the
number of the paths processed in
an online/offline operation.
aa...aa: Number of paths where
the online/offline operation
was successful (decimal (base-10)
number)
bb...bb: Online or Offline(C)
cc...cc: Number of paths where
the online/offline operation
was unsuccessful (decimal
(base-10) number)
dd...dd: online or offline
Action
None. For details on the online
operation, see online (Places
Paths Online) on page
details on the offline operation,
see offline (Places Paths Offline)
on page 6-5.
Details
As a result of a previous online/
offline operation, the specified
6-10. For