Hitachi XP P9500 User Manual page 386

and program
information to
be displayed
-
lbpathusetime
s
The number of
times the same
path can be
used for load
balancing
#
Examples
Example 1
The following example shows how to display information about the HDLM
function settings.:
# /opt/DynamicLinkManager/bin/dlnkmgr view -sys -sfunc
HDLM Version
Service Pack Version
Load Balance
Support Cluster
Elog Level
Elog File Size(KB)
Number Of Elog Files
Trace Level
Trace Files Size(KB)
Number Of Trace Files
Path Health Checking
Auto Failback
Reservation Status
Intermittent Error Monitor
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
#
Example 2
The following example shows how to display information about the HDLM
manager:
# /opt/DynamicLinkManager/bin/dlnkmgr view -sys -msrv
HDLM Manager Ver
Alive
6-34
Parameter
Item
Times Same
Path Was Used
When you use cluster software, the settings of the cluster function
and the kinds of cluster servers are not displayed. However, the
cluster function will operate normally.
x.x.x-xx
Command Reference
Hitachi Dynamic Link Manager User Guide (for Linux(R))
If the collection of audit log data is disabled, a
hyphen (-) is displayed.
The number of times the same path can be used
for I/O operations when the Round Robin (rr),
Least I/Os (lio), or Least Blocks (lbk) algorithm
is used for load balancing.
: x.x.x-xx
:
: on(extended lio)
:
: 3
: 9900
: 2
: 0
: 1000
: 4
: on(30)
: on(1)
:
: off
WakeupTime
yyyy/mm/dd hh:mm:ss
Description