Hitachi XP P9500 User Manual page 149

To copy the DVD-ROM to a directory, and then install HDLM from that
directory, copy the DVD-ROM to a directory with the same name as
the mount point noted above. If the file permissions or the directory
structure differs, HDLM cannot be installed.
#
This refers to the volume name for the CD-ROM or other media,
formatted for ISO-9660 file systems. Use the volname command to
check media-volume-id.
The following shows an execution example for when media-volume-id
is VOL01234.
# volname /dev/cdrom
VOL01234
#
4 Check the version of HDLM.
.
Execute installux.sh or the HDLM installation utility (installhdlm)
stored on the HDLM DVD-ROM to check the version of HDLM that will be
installed.
The following example shows how to execute the command when the
mount point for the DVD-ROM is /media/cdrom:
When executing installux.sh
¢
# /media/cdrom/installux.sh -v
When executing the installhdlm utility
¢
# /media/cdrom/HDLM_Linux/installhdlm -v
A command execution example is described below. x.x.x-xx is the version
of HDLM.
KAPL09177-I HDLM version: x.x.x-xx
5 Perform the installation.
.
Execute installux.sh or the installhdlm utility stored on the HDLM
DVD-ROM to start installation.
The following shows an installation execution example for when the DVD-
ROM mount point is /media/cdrom.
When executing installux.sh
¢
# /media/cdrom/installux.sh
When executing the installhdlm utility
¢
# /media/cdrom/HDLM_Linux/installhdlm
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Linux(R))
3-81