Error Information - Hitachi XP P9500 User Manual

Table 2-8 Types of Error Information on page 2-32

error information.

Log name
Process-specific-
trace information
file
Trace file
Error log
HDLM-
configuration
definition utility (
dlmcfgmgr ) log
Syslog
#
When you want to configure the system so that HDLM messages are
output to syslog, specify user for the facility in the syslog settings file.
2-32
Table 2-8 Types of Error Information
Description
Operation logs for the HDLM command
are collected.
Trace information on the HDLM
manager is collected at the level
specified by the user. If an error occurs,
you might need to change the settings
to collect trace information.
Error information is collected for the
user-defined level. By default, HDLM
collects all error information.
Logs are collected when the dlmcfgmgr
utility is executed.
The HDLM messages on or above the
level set by the user with syslogd
settings file are collected.
We recommend that you configure the
system so that information at the
Information level and higher is output.
Syslogs can be checked using a text
editor.
HDLM Functions
Hitachi Dynamic Link Manager User Guide (for Linux(R))
describes the types of
Output destination
The default file path is /
var/opt/
DynamicLinkManager/log/
dlnkmgr[1-2].log.
The following is the trace file
name:
/var/opt/
DynamicLinkManager/log/
hdlmtr[1-64].log
HDLM Manager logs:
/var/opt/
DynamicLinkManager/
log/dlmmgr[1-16].log
Hitachi Command Suite
Common Agent Component
logs:
/var/opt/
DynamicLinkManager/
log/dlmwebagent[1-
N].log
The value N depends on
the setting in the file
dlmwebagent.properti
es.
The following is the log file
name.
•
/var/opt/
DynamicLinkManager/
log/
dlmcfgmgr[1-2].log
•
/var/opt/
DynamicLinkManager/
log/dlminquiry.log
The default file path is /
var/log/messages.
#
The syslog file path is
specified in the syslogd
settings file. For details, see
the Linux documentation.